RUKO Hand Taps MF DIN 2181 HSS MF 6 x 0.75mm Taper Tap vendor_LOCTITE To save you time

To save you time

the maximum working speed is 2400r/min

(3) Torx Bit Insert 25mm TX20

8m Drop Rating

RUKO Hand Taps MF DIN 2181 HSS MF 6 x 0.75mm Taper Tap vendor_LOCTITE To save you timeOverview The hand tap consists of heavy duty high speed steel. For through threads and bottoming threads in unalloyed and low alloyed steels up to a strength of 800 N mm, malleable cast iron and non ferrous metals. The thread is cut in three operation. Taper tap: 5 6 thread chamfer Specifications Length: 50. 0 mm Aluminium Brass Plastics Steel < 800 N mm Shaft: Square shank Coating: uncoated Material: HSS Cutting Direction: right hand cutting DIN: