RUKO Hand Taps UNF ≈ DIN 2181 HSS 1/2in, 2 Pce vendor_ASA hollow 3/8 inch (10 mm)

hollow 3/8 inch (10 mm) ∙ Inside TORX® profile ∙ T40 8802KV-LG-T40 Screwdriver socket ∙ with protective insulation Square

The sturdy handles are kind on your grip so you can wheel it with ease from project to project around the busy workshop

Mitre capacity

Product OAL (mm - in): 115

RUKO Hand Taps UNF ≈ DIN 2181 HSS 1/2in, 2 Pce vendor_ASA hollow 3/8 inch (10 mm)Overview The hand tap consists of heavy duty high speed steel. For through threads and bottoming threads in unalloyed and low alloyed steels up to a strength of 800 N mm, malleable cast iron and non ferrous metals. The thread is cut in three operation. Taper tap: 5 6 thread chamfer Final tap: 2 3 thread chamfer Specifications Length: 75. 0 mm Shaft: Square shank Coating: uncoated Material: HSS Cutting Direction: right hand cutting DIN: 2181 Core Hole