Pro-Tools 90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (450 mm OD 1778 mm CLR) Quick Clamps Apply sparingly with a non

Apply sparingly with a non woven pad (rated equalto orjust higher than yourlast sanding grit) and work the wax into the surface using circular motions

4-1/8" x 9TPI (792729-9-1)

Alternate use with select routers and circular saws

a tip with a 3/64” orifice is good for 0-40 amps whereas a 1/16” orifice is better for 40-80 amps

Pro-Tools 90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (450 mm OD 1778 mm CLR) Quick Clamps Apply sparingly with a nonSpecs Outside Diameter of the Tubing (OD): 45. 0 mm Minimum Wall Thickness (DOM): 0. 095 (2. 4 mm) Minimum Wall Thickness (4130): 0. 095 (2. 4 mm) Minimum Wall Thickness (ERW): 0. 109 (2. 8 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 6 (152. 4 mm) Maximum Degree of Bend: